Hard Disk Generator

This one of the smaller piles of Hard Disks that I receive a couple of times per year.
My 2 main sources are a local computer recycler that has saved me upwards of 200 drives in a single load, and a pair of chums that work in the I.T. Sector and save me what ever goes bad on their network.
This load represents about 2 weeks of evenings stripping down the drives and sorting the scrap into various piles. The Aluminum frames are recovered for the foundry and are an excellent stock as they flow nicely and are easy to machine. The yellow bucket of "Platter Hub Motors" needs to be melted twice, once to reduce the Alum from the internal metallic parts, and the second time for what ever project is underway. More.. , 2, 3, 4, 5

Related:

• Link...
  

DIY ~20U server rack

From: Deadly Computer Blog

This is something mike has been looking to make for the past few days, ever since he got his new computer case for his awesome new computer. He originally wanted to buy a server rack, so he can mount his case in it, and mount the NAS he has with it, but those cost lots of lots of money. So, our solution, after thinking up at night, was to make one ourselves. I suggested iron gas piping, and mike suggested angle iron. Mike won because in the end, it would be easier to build with angle iron. Detail...

Computer Art

From: cmuseum.timacad.ru

Personal Computer Museum by the Board of University Technology ship began formal rovatsya world in February 2004 from non prav- foot traffic rudo--tion. It represented computer skills, accepted money, mouse, media information and hand out details. And am all began in 1995 with a collection of computer components mice. Detail...

Related:

• hackedgadgets.com Link...
• englishrussia.com Link...
• TechEBlog Link...
  

How To Add More 3½ Bays

From: overclockers.com

First, kudos to my older brother Mike for showing me this cool add-on. Next, supplies you will need: Scissors , Plumber's Wrap (Can be found at Home Depot or Lowes) , Screws , Screwdriver
Now, start by cutting four short strips and two long strips of the Plumber's Wrap. Cut desired length depending on how many drives you want to add. In this article, we added two drives, so five holes on the two short strips and seven holes on the long strip. Add two more holes to the length to accommodate another drive, and so on. Detail...

How To Make A Fan Guard

From: overclockers.com
I will be showing you how to make a "Fan Guard" for protect your fingers by using only plastic and a super LED.
First, to begin you must prepare instrument and materials as show in table below. Then cut the plastic as your design and should fit with a fan. Next, super LED is added in side of the plastic. Detail...

Constructable CD Sculpture

At the invitation of Prof. Susan Gerofsky, I visited The University of British Columbia (UBC) as artist-in-residence for a week during January 2007. The agreed-upon project was for me to develop a mathematical sculpture that can be replicated in classrooms. I worked with Susan, student teachers in UBC's education program, and visiting students from Vancouver-area schools to test the ideas and write up a lesson plan. In addition I left one example on display, as a reference model Detail...

Related:

• Link...
  

VGA over Cat-5 ethernet cable

It's possible to send a VGA "video" signal down an ordinary Cat-5 ethernet cable. This is possible for two reasons: firstly, although VGA connectors have 15 (or 13) pins, only about 8 wires are actually necessary to send the VGA signal; and secondly, ethernet cable is twisted pair, and we can use the magic of twisted pair to push the analog VGA signal further than spec. The diagram above shows conversion from HD15 (VGA) to RJ45 (an ethernet socket). A similar adapter is used to convert back again. Connectors are shown from the solder side. This diagram assumes your Cat-5 cable is crimped in the standard way (not as a cross-over cable). Detail...

Related:

• MakeZine.com Link...